Operation Manual

256 NetWare MultiProtocol Router for ISDN 3.1 Installation and ISDN Configuration Guide
Table 18-7:
Information in Remote Node
Information Description
Remote Node Type The type of remote node. Static means that the remote node was configured
to be a static remote node. Dynamic means that this is no static remote
node.
Interface The name of the interface in the form of Board Name_n, where n is the
interface number.
Call Destination The call destination name of the remote node.
ISDN Number The ISDN Number of the remote node.
Node Address is the MAC Address used by the remote node.
IP Address is the IP Node Address used by the remote node.
Server Recall Displays whether Server Recall was negotiated. Enabled: Server Recall
negotiated; Disabled: no Server Recall negotiated.
Figure 18-7:
Information in Remote Node
MONITORI.PM6 27.05.97, 23:52256