Operation Manual

250 NetWare MultiProtocol Router for ISDN 3.1 Installation and ISDN Configuration Guide
the ISDN Connection Monitor barred it, Time Restrictions do not allow usage
at this time or it was barred via any SNMP based application.
Outbound Call shows the current setting for Outbound Call Processing on this ISDN inter-
Processing face.
Inbound Call shows the current setting for Inbound Call Processing on this ISDN interface.
Processing
Origination Address shows the complete address of this ISDN interface. The Origination Address
is made up of the ISDN Number, the PBX Extension and the Subaddress.
Call Acceptance indicates the Call Acceptance status configured in the "Expert Configuration"
for this interface.
Interface Usage the usage of the interface as configured in the "Expert Configuration".
"LAN-LAN" means that no connections to remote NetWAYS/ISDN and PPP-
compatible nodes are allowed over this interface. "Remote Node-LAN"
means that this interface can only be used for connections to remote Net-
WAYS/ISDN and PPP-compatible nodes. "Both" allows both types of connec-
tions over this interface.
Total Queue Limit shows the value of the "Queue Limit" parameter that has been configured
Count for this interface in the ISDN Expert Port Configuration since this ISDN
interface was loaded (the default for this Queue Limit is 100).
Queue Depth Count is the number of Transmit Packets that are queued on the ISDN-Controller at
a given time for this interface.
Total Send Packets is the total number of packets to be sent that were dropped because the
Dropped Count maximum Queue Limit was exceeded since this ISDN interface was loaded.
Total Receive Packets is the total number of packets to be received that were dropped because of
Dropped Count ECB allocation errors since this ISDN interface was loaded.
Total Send Calls is the total number of calls and call retries (see parameter "Number of
Failed Count Retries" configured for each interface in the "ISDN-Controller Expert Inter-
face Configuration") without subsequent successful establishment of a
connection since this ISDN interface was loaded. Note that this number is a
subset of Total Outgoing Calls.
Total Physical is the total amount of time in seconds during which the interface has been
Connection Time Count physically in use since the ISDN interface was loaded. Note that at any given
time either the Total Physical Connection Time Count or the Total Inactivity
Time Count increases, depending on whether this ISDN line is physically in
use or not.
MONITORI.PM6 27.05.97, 23:52250