Operation Manual

246 NetWare MultiProtocol Router for ISDN 3.1 Installation and ISDN Configuration Guide
"Interfaces": ISDN-Controller and Interface-Oriented Information
Figure 18-4:
ISDN Interfaces
Current Inactivity shows the Inactivity Timeout value (in seconds) configured in the ISDN Call
Timeout Value (sec) Destination Configuration for the current connection. If Self-Learning Timeout
is enabled, the adjusted Timeout value is displayed here.
Current Disconnect is the Disconnect Timeout value (in seconds) that has been configured in the
Timeout Value (sec) ISDN Call Destination Configuration for the current connection. If Self-
Learning Timeout is enabled, the adjusted Timeout value is displayed here.
Current Incoming Calls indicates the number of incoming calls during the specified period (1h or
24h).
Current Outgoing Calls indicates the number of outgoing calls during the specified period (1h or
24h).
The detailed status and statistical information within the menu
"Interfaces" is ISDN-Controller- and interface-oriented. Most informa-
tion is also accessible via SNMP and is defined in the
MPR4ISDN.MIB.
Table 18-4:
Information in ISDN Interfaces
Information Description
Interface The name of the interface in the form of BoardName_n, where n is the
interface number.
When you select "Interfaces", the following menu appears on your
screen:
MONITORI.PM6 27.05.97, 23:51246