Operation Manual

226 NetWare MultiProtocol Router for ISDN 3.1 Installation and ISDN Configuration Guide
Enter the following command at the system console of each router in
the WAN:
load isdninfo <Enter>
The ISDNINFO.DAT file gathers the following information:
- The configuration of all interfaces loaded
- All ISDN call destination configurations
- The contents of the following files:
STARTUP.NCF
AUTOEXEC.NCF
ETC\INITSYS.NCF
ETC\NETINFO.CFG -> all INETCFG commands
ETC\SNMP.CFG -> SNMP information for this node
ETC\TRAPTARG.CFG -> SNMP Manager Table (IPX, TCP/IP)
ETC\REMOTE.ID -> contains all Remote System IDs
ETC\NLSP.CFG -> IPX configuration information
ETC\IPWAN.CFG ->TCP/IP configuration information
ETC\TCPIP.CFG -> "
ETC\ATTYPES.CFG -> AppleTalk configuration information
ETC\ATWAN.CFG -> "
ETC\ATZONES.CFG -> "
ETC\AURP.CFG -> "
ETC\BUILTINS.CFG -> FILTCFG.NLM configuration
ETC\FILTERS.CFG -> "
ETC\ISDN.CFG -> ISDN configuration file
ETC\ISDNCRON.CFG -> Time Restrictions configuration file
ETC\ISDNCADB.CFG -> ISDN Call Acceptance Database
SYSTEM\INSTALL.LOG -> Installation log file
ETC\CONSOLE.LOG
ETC\ISDNCONV.LOG -> ISDNCONV.NLM log file
ETC\NWPARAMS.LOG
SYSTEM\SETANDS.CP ->NetWare 4.1
SYSTEM\TIMESYNC.CFG -> "
SYSTEM\DSFILTER.DAT -> "
Utilitie.pm6 27.05.97, 21:20226