Operation Manual

Utilities 225
ISDNCONV.NLM is a utility that converts existing NetWare Multi-
Protocol Router for ISDN 2.x and 3.0 databases to 3.1 databases.
ISDNCONV.NLM does the following:
- Converts the ISDNCMON.CFG to the ISDN.CFG.
- Generates load commands in the autoexec.ncf file to load SPX and
Packet Burst patches.
- Removes old NetWare MultiProtocol Router for ISDN files from
the SYS:SYSTEM directory, such as ISDN.LAN, VN3.T4, CT1.T4,
PPPDEBUG.NLM, etc.
- Logs all changes in the SYS:ETC\ISDNCONV.LOG file.
There are some items which are not automatically chaged with the
ISDNCONV.NLM. For more information, refer to the Technical Note on
NetWare MultiProtocol Router for ISDN 3.1.
ISDNCONV.NLM
Note
ISDNCHK.NLM
The ISDNCHK.NLM is a tool to verify your configuration. It detects
inconsistencies in your router configuration and displays them on the
system console, together with the necessary tasks to perform.
ISDNCHK is loaded automatically each time you select the Reinitialize
System command from the Internetworking Configuration menu and
performs the set force rip sap updates=on command and
adjusts the Periodic Update Interval for IPX RIP and IPX SAP to
10000.
ISDNINFO.NLM
ISDNINFO.NLM is a support tool to gather relevant information in a
quick and convenient way. The gathered information is stored in the
ISDNINFO.DAT file which is automatically written to the SYS:ETC
directory.
Before calling AVM Technical Support, you should therefore run
ISDNINFO.NLM.
Utilitie.pm6 27.05.97, 21:20225