Operation Manual

224 NetWare MultiProtocol Router for ISDN 3.1 Installation and ISDN Configuration Guide
The ISDN Connection Monitor watches the interfaces of an ISDN-
Controller. As soon as the threshold value for an interface is reached,
an alert is generated 3 times in 1-minute intervals and printed on the
system console. After that, the respective interface is automatically
barred; i.e., all connections set up over this interface are cleared, no
outgoing calls can be established over it and incoming calls on the
ISDN-Controller are rejected if addressed to this interface until the
administrator removes this bar.
The ISDN Connection Monitor is described in detail in Chapter 18,
"Monitoring ISDN Connections."
ISDNU.NCF
ISDNSNMP.NLM
The ISDNU.NCF file contains commands for unloading the ISDN
drivers of the NetWare MultiProtocol Router for ISDN 3.1.
ISDNSNMP.NLM is the SNMP Agent to be used by AVM´s MPR for
ISDN Router Manager product or by any SNMP-based application.
ISDNSNMP.NLM initiates and responds to requests for management
information as described in the MPR4ISDN.MIB.
The load command for ISDNSNMP.NLM is included in the
autoexec.ncf file of the server, thus ensuring that it is automatically
loaded each time the server is started.
ISDN.CFG
ISDN.CFG is the configuration file for various NLMs and drivers
provided with the NetWare MultiProtocol Router for ISDN 3.1. It
contains sections for configuring the following:
Statistic Update Interval, ISDNCON.NLM, ISDNLOG.NLM,
ISDNSNMP.NLM, ISDNCMON.NLM, ISDN*.LAN, etc.
Utilitie.pm6 27.05.97, 21:20224