Operation Manual

Configuring Remote Node Access 215
Binding IPX to ISDNWAYS
Procedure
For IPX, check the setting for "Get Nearest Server Requests" and
"Override Nearest Server".
1. From the Internetworking Configuration menu, select Bind-
ings.
2. Press <Ins> and select IPX from the list of configured proto-
cols.
3. Select your ISDNWAYS ´board´ from the list of configured
network interfaces.
The Binding IPX to a LAN Interface menu is displayed.
4. Enter a valid IPX Network Number, then press <Enter>.
The IPX Network Number is the 4-byte network number as-
signed to the network to which the ISDNWAYS ´board´ is at-
tached. The range is 00000001 through FFFFFFFE.
5. Leave the default for Frame Type.
6. Press <Enter> on Expert Bind Options.
7. Select RIP Bind Options.
7a. Set the RIP State to Off.
Press <Esc> to return to the Binding IPX to a LAN Interface
menu.
8. Select SAP Bind Options.
8a. Set the SAP State to Off.
8b. Set Get Nearest Server Requests Override to Accept to
allow access from remote nodes.
Press <Esc> to return to the Binding IPX to a LAN Interface
menu.
9. Select NLSP Bind Options.
Remoteno.pm6 27.05.97, 21:14215