Operation Manual

Configuration Interdependencies 207
Controller, if no unique MSNs, EAZs or DDIs are used. Otherwise,
the following occurs:
Situation
Router A:
Interface 1: Call Acceptance: All Numbers
Interface 2: Call Acceptance: Only Registered Numbers: CLI or
Only Registered Numbers: CLI and Caller-Specified
- Router B calls Router A.
Consequence
When Router B calls Router A, its call will always be accepted even if its CLI Number is not configured in
the Call Acceptance Database.
If the situation is the other way round, i.e. interface 1 is configured to
perform a CLI number check and interface to accept all numbers, a
call from router B will never be accepted when its CLI Number is not
configured in the Call Acceptance Database.
The Remote Site Is Not Available
Static Bundling and Channel On Demand
If you want to use Static Bundling or Channel On Demand for a
connection, the requested number of B channels must be available on
the remote site.
Situation
Router A:
Uses an AVM ISDN-Controller T1.
Call destination
for Router B: Static Bundling enabled with more than 1 B channel.
Router B:
Uses an AVM ISDN-Controller B1.
- Router A calls Router B.
Configur.pm6 27.05.97, 12:33207