Operation Manual

198 NetWare MultiProtocol Router for ISDN 3.1 Installation and ISDN Configuration Guide
1. Load INETCFG, then select Backup Call Associations.
The Backup Call Associations screen is displayed. It lists all cur-
rently configured backup call associations with the following
information:
Primary Call Destination - A WAN call destination name that
has been configured to be a primary call destination.
Backup Call Destination - A WAN call destination name that
has been configured to be a backup call destination to the pri-
mary call destination.
Status - Current status of the backup call associations.
This screen is empty if no backup call associations are config-
ured.
2. Press <Ins> to create a new backup call association.
The Backup Association Configuration screen is displayed. The
Primary Call Destination field is highlighted.
3. Press <Enter> to display a list of configured WAN call desti-
nations that are available to be primary call destinations.
A list of WAN call destinations is displayed. These are the
configured WAN call destinations that are available to define as
primary call destinations. Destinations that have already been
configured to be primary or backup call destinations are not
listed here.
4. Select a primary call destination.
The Backup Association Configuration screen is displayed again.
The Primary Call Destination field is filled in, and the Backup Call
Destination field is highlighted.
5. Press <Enter> to display a list of configured WAN call desti-
nations that are available to be backup call destinations.
The list of WAN call destinations is displayed again. The destina-
tion you selected as a primary call destination is no longer
contained in this list.
6. Select a backup call destination.
The Backup Association Configuration screen is displayed with the
Backup Call Destination field filled in.
Procedure
Advanced.pm6 27.05.97, 11:15198