Operation Manual

Configuring AppleTalk 189
Network Range/Number - Press <Enter>, specify the
network range for extended networks or a single network
number for nonextended networks, then press <Enter>
again.
Hops to Network - Press <Enter>, specify the number of
hops between this router and the destination network, then
press <Enter> again.
Each router the packet goes through is one hop.
Network Zone(s) List - Press <Enter>, then press <Ins>, add
a zone, then press <Enter> again. Repeat this procedure
until you have entered all the zones on the destination
network.
4. Activate the configuration by selecting the Reinitialize
System command from the Internetworking Configuration
menu.
Appletal.pm6 27.05.97, 11:16189