Operation Manual

Configuring TCP/IP 185
lower-cost dynamic route to the same destination, it uses
the lower-cost route instead of the active static route. If the
lower-cost route becomes unavailable, the router returns to
using the active static route. A passive static route is always
used, regardless of whether the router discovers a lower-
cost route to the same destination. If you want to use the
static route as a backup route, select Active.
3g. Press <Esc> to return to the Binding TCP/IP to a WAN
Interface menu.
3h. Press <Enter> on RIP Bind Options and set the Status
to Disabled.
3i. Press <Enter> on OSFP Bind Options and set the Status
to Disabled.
4. Activate the configuration by selecting the Reinitialize
System command from the Internetworking Configuration
menu.
Tcpip.pm6 27.05.97, 21:16185