Operation Manual

Configuring IPX 181
3f. Select Expert Bind Options.
3g. If you chose NLSP with RIP/SAP Compatibility as Rout-
ing Protocol, select NLSP Bind Options and set the
NLSP State to Off.
4. Press <Esc> until you return to the Internetworking Configu-
ration menu and save your changes when prompted.
5. Select the Reinitialize System command to bring configura-
tion changes into effect.
If you change configurations that involve IPXRTR.NLM, i.e. any IPX
routing protocol configurations such as from RIP/SAP to NLSP for
example, select the Reinitialize System command from the
Internetworking Configuration menu.
Reinitialize System automatically loads ISDNCHK.NLM to
- execute the set force rip sap updates=on command, and
- adjust the Update Interval for IPX RIP and IPX SAP to 10000.
Reinitialize System and IPX Configuration Changes
Ipx.pm6 27.05.97, 21:05181