Operation Manual

176 NetWare MultiProtocol Router for ISDN 3.1 Installation and ISDN Configuration Guide
What You Need
Procedure
/F<filename> Writes the strings “OK” or “ERROR” to a file, depending on
the success of the operation. This is useful for quick and
easy error detection in batch environments.
Procedure
Table 9-5:
Exit codes (ERRORLEVEL) for CICCOS2.EXE
Code Description
-1 Fatal error during program initialization
0 No error
1 IPX/SPX fatal error
2 Server/router not found
3 No free local SPX socket
4 Call Manager on the router not found
5 Aborted by user (should never occur)
6 Call Manager operation timed out (failed)
7 Requested target not found
8 The CICCDLL is busy (should never occur)
Before configuring call destinations to use with CICC, decide whether
you want to use NLSP or RIP/SAP as a routing protocol. AVM recom-
mends that you use RIP/SAP for connections over ISDN.
For RIP/SAP connections over ISDN, the Periodic Update Interval for IPX
RIP and SAP is automatically set to 10000 when you reinitialize your system!
Note
You configure manual IPX connections as follows:
1. Configure an ISDN Call Destination entry.
Parameter path: Select WAN Call Directory > Press <Ins> >
Specify a name for the call destination > Select a Wide Area
Medium.
Ipx.pm6 27.05.97, 21:05176