Operation Manual

Configuring IPX 173
A list of all IPX connections currently logically active over ISDN is
returned.
Example: CICCSTAT -sFS4 lists all IPX connections that are cur-
rently established logically from or to the local server/router with the
name "FS4".
The CICC module has been developed mainly for the use in batch
routines. Information on the status of an action may be obtained by
the corresponding errorlevel. A returncode other than "0" (zero)
means that an error must have occurred.
Returncodes via Errorlevel for Batch Routines
Table 9-2:
CICC Returncodes
Returncode Description
0 Action successful ./.
1 Error during set up / incorrect parameter. Local system
error.
2 IPX not found. Local system error
3 SPX not found. Local system error
4 No communication socket available. Local system error
5 No server found. Local system error.
6 Server/router does not respond / not found. Local system
error
7 Local server not found (Read PropertyValue) Local system
error.
10 No memory (client). System error.
20 Destination not known / found. Communication error.
21 Connection set-up to server/router not successful. Commu-
nication error.
22 Connection set-up to the remote server/router not success-
ful. Communication error
23 No response from server/router (Invalid Target, Timeout).
Communication error
Ipx.pm6 27.05.97, 21:05173