Operation Manual

Configuring Global Parameters 163
Configuring SNMP Manager Tables
19. Select Human Contact, then press <Enter>.
Enter the contact information for the persons responsible for this
node, then press <Esc>. The contact information should include
phone numbers and mailing addresses.
20. When you are finished, press <Esc>; if prompted, select Yes
to save the changes to the SNMP information, then press
<Enter>.
The Manage Configuration menu is displayed.
21. Press <Esc> to return to the Internetworking Configuration
menu.
The list of SNMP Managers can be configured as follows:
For the IPX protocol, SNMP Managers cannot be configured from any
NetWare MultiProtocol Router for ISDN 3.1 menu. Therefore, use
EDIT.NLM to edit the traptarg.cfg directly:
load edit sys:etc\traptarg.cfg
Add or delete SNMP Managers from the file and save your changes.
For TCP/IP, SNMP Managers can be configured directly from the
Internetworking Configuration menu:
Parameter path: Load INETCFG > Select Protocols > Select TCP/IP >
Select SNMP Manager Table.
Globalpa.pm6 27.05.97, 12:45163