Operation Manual

160 NetWare MultiProtocol Router for ISDN 3.1 Installation and ISDN Configuration Guide
4. From the SNMP Parameters window, select Monitor State,
then press <Enter>.
The following options allow you to indicate how the SNMP
agent handles SNMP read operations coming from outside this
node.
Table 15-1:
Monitor State Parameters
Option Description
Any Community May Allows all read operations no matter what community name is provided in the
Read incoming read request.
Leave as Default Avoids changing the Monitor Community name from its default (which is
Setting usually public). The default Monitor Community can still be changed manu
lly through SNMP command-line options.
No Community May Disables all read operations no matter what community name is provided in
Read the incoming read request.
Specified Community Allows only read operations that contain the name specified in the Monitor
May Read Community field.
5. Select one of the options described above, then press
<Enter>.
6. If you selected Specified Community May Read, enter a
name in the Monitor Community field, then press <Enter>.
Enter the name of the community that is allowed to read
management information. SNMP management stations that
belong to this community can read the network management
database.
7. Select Control State, then press <Enter>.
The following options allow you to indicate how the SNMP
agent handles SNMP write operations coming from outside this
node.
Table 15-2:
Control State Options
Option Description
Any Community May Allows all set operations no matter what community name is provided in the
Write incoming read request.
Globalpa.pm6 27.05.97, 12:45160