Operation Manual

Configuring Global Parameters 159
pressing Delete in the Call Connection Manager for example),
the ISDN connection information is written to the ASCII-format
log files in a single line.
2a. Check the maximum file size for the ISDN Accounting
Daily Log.
Specify the size of a single ISDN Accounting Log File.
Logging is stopped when the maximum size of a single file
is reached. A value of 0 means that the size is unlimited.
You should not set the file size to unlimited. If you are using an
AVM ISDN-Controller for PRI, the file can become very big in a
short time.
Note
Configuring SNMP Information
Configuring SNMP Parameters
SNMP enables network management clients to exchange information
about the configuration and status of nodes on an internetwork. The
information available is defined by a set of managed objects referred
to as the Management Information Base (MIB).
To configure SNMP parameters for a specific node, complete the
following steps:
1. At the server prompt, type
LOAD INETCFG <Enter>
The Internetworking Configuration menu is displayed.
2. From the Internetworking Configuration menu, select Mana-
ge Configuration, then press <Enter>.
The Manage Configuration menu is displayed.
3. From the Manage Configuration menu, select Configure
SNMP Parameters, then press <Enter>.
The SNMP Parameters window is displayed.
Procedure
Globalpa.pm6 27.05.97, 12:45159