Operation Manual

158 NetWare MultiProtocol Router for ISDN 3.1 Installation and ISDN Configuration Guide
3. Decide whether you want to display the Currency Symbol
First.
Default: Enabled
Options: Enabled, Disabled
Enabled means that any connection charges are displayed in the
form DM <Amount>.
If this parameter is disabled, charges are displayed as
<Amount> DM.
Writing Daily Log Files
1. ISDN Line Management Daily Log.
The ISDN Line Management Daily Log keeps a record of all
actions that are performed on the router on a single day. The file
name is of the form isdn??.log, the question marks being re-
placed with the day of the month, e.g. isdn01.log for the first day
of the month, isdn02.log for the second, etc. With the beginning
of a new month, the files are subsequently written over. The log
files are by default stored in the SYS:ETC directory. All ISDN line
management messages are listed and described in Appendix A.
1a. Check the maximum file size for the ISDN Line Manage-
ment Daily Log.
Specify the size of a single ISDN Line Management Daily
Log. Logging is stopped when the maximum size of a single
file is reached. A value of 0 means that the size is unlimited.
You should not set the file size to unlimited. If you are using an
AVM ISDN-Controller for PRI, the file can become very big in a
short time.
2. ISDN Accounting Daily Log.
The ISDN Accounting Log stores ISDN connection oriented
information provided via ISDN Console. The file name is of the
form isdn??.acc, the question marks being replaced with the day
of the month, e.g. isdn01.acc for the first day of the month,
isdn02.acc for the second, etc. It allows you to monitor all impor-
tant details on all ISDN connection on a router from the first
logical set up to the final logical clear down. Each time an ISDN
connection is cleared logically (Disconnect Timeout expires or by
Note
Procedure
Globalpa.pm6 27.05.97, 12:45158