Operation Manual

Configuring Global Parameters 157
1. Check Send Line Management Traps.
This parameter defines whether ISDN Line Management Traps
are sent to any SNMP-based management console or not.
Default: Disabled
Options: Disabled, Enabled
2. Check Send Error Cause #33 Traps.
Here you specify whether you want Traps reporting ISDN error
causes 0x33 to be sent to any management console.
Default: Enabled
Options: Enabled, Disabled
3. Check Send Error Cause #34 Traps.
Define whether you want Traps reporting ISDN error messages
0x34 to be sent to any management console.
Default: Enabled
Options: Enabled, Disabled
Adjusting the Currency Display
The NetWare MultiProtocol Router for ISDN 3.1 provides a number
of statistics in its ISDN Console, among them information on connec-
tion charges. Besides, it allows you to configure budget values for
each call destination. In order that these values are displayed cor-
rectly, you have to adjust the currency display in the Global MPR for
ISDN Configuration.
1. Check the Currency Symbol.
Default: DM
Enter the symbol for the currency used in your country.
2. Enter a value for Charge Per Unit.
Default: 0.12
Enter the price of one charge unit in your country.
Procedure
Procedure
Globalpa.pm6 27.05.97, 12:45157