Operation Manual

Configuring Global Parameters 155
containing the number transmitted over the ISDN B channel. In
this case, select Yes and enter the second number.
If not, select No. The new remote site appears in the Call
Acceptance Database menu. The entries are sorted automatically
in descending order.
7. Repeat Steps 2 through 6 for each site you want to allow
access.
8. When you are finished, press <Esc>, select Yes and press
<Enter> to return to the Global MPR for ISDN Configuration.
Automatically Loading NLMs at Specified Times
The option Time-Controlled NLM Loading of the MPR for ISDN Global
Configuration menu allows you to automatically load NLMs at speci-
fied times.
For example, you can load CICCON.NLM and CICCOFF.NLM at
specified times to automatically transfer data to a remote site, activate
and deactivate ARCServer or start an NDS synchronization at pre-
defined times.
Press <Enter> on Time-Controlled NLM Loading to display the follow-
ing menu:
Figure 8-2:
Time-Controlled Loading of NLMs Configuration
To enter an NLM in the list, press <Ins> to display an empty mask.
Globalpa.pm6 27.05.97, 12:45155