Operation Manual

Configuring ISDN Call Destinations 151
If you change the Call Type or Network Interface of a WAN Call Destina-
tion that is used in a bind, the bind is no longer valid. If this occurs, edit
the bind or delete it.
5. Select Yes to save the changes, then press <Enter>.
The list of configured WAN Call Destinations is redisplayed.
6. Press <Esc> to return to the Internetworking Configuration
menu.
Important
Deleting an ISDN Call Destination
To delete an ISDN Call Destination, complete the following steps:
1. At the server prompt, type
LOAD INETCFG <Enter>
The Internetworking Configuration menu is displayed.
2. From the Internetworking Configuration menu, select WAN
Call Directory , then press <Enter>.
A new window displays a list of the configured WAN Call
Destinations.
3. Highlight an ISDN Call Destination in the list, then press
<Delete>.
A message is displayed indicating that deleting this ISDN Call
Destination also deletes all binds that refer to this ISDN Call
Destination.
4. Select Yes to delete the ISDN Call Destination and all binds
that refer to it, then press <Enter>.
5. Press <Esc> to return to the Internetworking Configuration
menu.