Operation Manual

About This Guide 15
Conventions Used
Chapter 14, "Configuration Interdependencies," provides specific
information on interdependencies between configuration parameters.
Chapter 15, "Configuring Remote Node Access," provides specific
procedures to configure the NetWare MultiProtocol Router for ISDN
3.1 for remote node access from NetWAYS/ISDN or PPP-compatible
clients.
Chapter 16, "Utilities," describes special NetWare MultiProtocol
Router for ISDN 3.1 utilities which consist of console commands,
NetWare Loadable Module
TM
(NLM
TM
) and configuration files.
Chapter 17, "Testing the Configuration," provides specific procedures
for testing and troubleshooting the configurations associated with
NetWare MultiProtocol Router for ISDN 3.1.
Chapter 18, "Monitoring ISDN Connections," gives detailed informa-
tion on monitoring ISDN interfaces and ISDN connections and
shows how you can limit connections to save charges.
Appendix A, "System and Error Messages," describes the causes and
solutions of the system and error messages for the NetWare Multi-
Protocol Router for ISDN 3.1 product.
Appendix B, "AVM Data Call Center," provides specific access infor-
mation for the AVM Data Call Center.
The NetWare MultiProtocol Router for ISDN 3.1 Installation and ISDN
Configuration Guide uses the documentation conventions described in
this section.
The following typographical conventions are used:
- Highlighted monospaced character strings represent user input,
which must be entered exactly as shown; for example:
LOAD TCPIP <Enter> or Load tcpip <Enter>
- Highlighted and lowercase character strings show descriptive
names for items that you must replace with appropriate values.
For example, in the following NetWare console command, you
replace driver with the specific name of a driver:
UNBIND IP FROM driver <Enter>
Aboutthi.pm6 27.05.97, 11:1415