Operation Manual

140 NetWare MultiProtocol Router for ISDN 3.1 Installation and ISDN Configuration Guide
As you can see, all the input fields are empty.
To allow transmission of Ping for NDS packets at certain
times, press <Ins> or *.
Press <Esc> until you return to the ISDN Call Destination
Configuration menu.
For more information on initiation of Ping-for-NDS packets,
refer to the Technical Note.
30. Press <Enter> on CLI List .
The CLI List is a database containing all CLI numbers of this
remote site for incoming calls. The CLI number is required
- to relate an incoming call to a configured call destination (see
explanation at the beginning of this chapter).
- to perform a security check if Call Acceptance is set to "Only
Registered Numbers: CLI" or "Only Registered Numbers: CLI
and Caller-Specified".
- if you set COSO to "Local". In this case, the CLI number is
used to determine whether your router is allowed to assume
the charges for calls from this remote site.
30a. To enter the CLI number of a new remote site, press
<Ins>.
Figure 7-6:
NDS Pass Through Times Configuration menu