Operation Manual

138 NetWare MultiProtocol Router for ISDN 3.1 Installation and ISDN Configuration Guide
When a connection to this call destination is active and the
Call Status changes to "Disabled", the connection is auto-
matically terminated. No outgoing calls to this destination
are possible and incoming calls from it are rejected. A
configured backup call destination would then be activated.
As you can see, all the input fields are already filled in with
asterisks. This means the call destination can be used each
day of the week and every hour of the day.
To deny use at certain times, delete the corresponding
asterisks by pressing <Del> or the Space Bar. To restore the
asterisks, press <Ins> or *.
The key assignment is similar to that in the SYSCON utility
(NetWare 3.12) and NETADMIN/NWADMIN utilities
(NetWare 4.x).
To leave the menu and return to the Call Destination Time
Restrictions menu, press <Esc>.
29b. Inactivity Timeout .
Press <Enter> on Inactivity Timeout to display the following
menu:
Figure 7-5:
Inactivity Timeout Change menu
In this list you can determine days and times at which you
want the Inactivity Timeout to be changed automatically.
This is useful when you cannot use the Self-Learning
Timeout (for example Advice On Charge During Call not
activated) and want to configure times at which the Inactiv-
ity Timeout is changed to adapt it to the different day and
night tariffs of the ISDN network.
Initially, the list is empty.