Operation Manual

132 NetWare MultiProtocol Router for ISDN 3.1 Installation and ISDN Configuration Guide
This parameter specifies whether SNMP over IPX packets
(Socket 900F), SNMP Traps over IPX packets (Socket 9010) and
IPX diagnostic packets (Socket 456) are filtered.
Default: Enabled
Options: Enabled, Disabled
When the SNMP over IPX Filter is enabled, SNMP information
transported over IPX by the source or destination socket num-
bers 900F, 9010 and 456 are filtered and not transmitted over this
interface to any remote site.
When this filter is disabled, ISDN connections to remote sites
will be set up each time when those packets generated by the
SNMP applications are to be transferred.
Example: For the NetExplorer of NMS/ManageWise, the IPX
Diagnostic Packets send for the Workstation Discovery Process
would be filtered.
23. Check the SNMP Over IP Filter .
In conjunction with SNMP, the protocol IP can also be used to
transmit SNMP-related packets.
This parameter specifies whether SNMP over UDP packets (port
161) and SNMP Traps over UDP packets (port 162) are filtered.
Default: Enabled
Options: Enabled, Disabled
When the SNMP over IP Filter is enabled, SNMP information
transported over IP by the source or destination ports 161 and
162 are filtered and not transmitted over this interface to any
remote client.
When this filter is disabled, ISDN connections to remote sites
will be set up each time when those packets, generated by the
SNMP applications, are to be transferred.
Example: For the NetExplorer of NMS/ManageWise, the IP
Diagnostic Packets send for the Workstation Discovery Process
would be filtered.