Operation Manual

106 NetWare MultiProtocol Router for ISDN 3.1 Installation and ISDN Configuration Guide
If you set the Interface Status, Inbound Call Processing and
Outbound Call Processing to "Time Restricted", you can define
times during which these parameters are enabled and times
during which they are disabled.
To view or modify the times, press <Enter> on the respective
parameter.
Important
Figure 6-6:
Interface Time Restrictions Configuration Menu
Figure 6-7:
Interface Status Time Restrictions Menu
As you can see, all the input fields are already filled in with
asterisks. This means the parameter is enabled each day of the
week and every hour of the day.
To disable the parameter at certain times, delete the correspond-
ing asterisks by pressing <Del> or the Space Bar. To restore the
asterisks, press <Ins> or *.
The key assigment is similar to that in the SYSCON utility
(NetWare 3.12) and NETADMIN/NWADMIN utilities (NetWare
4.x).
If the interfaces of an ISDN-Controller are not identified by a unique
MSN, EAZ or DDI, make sure that Time Restrictions are set identically