Operation Manual

104 NetWare MultiProtocol Router for ISDN 3.1 Installation and ISDN Configuration Guide
sponding". This feature is useful for central sites that want to
make circular calls to their branch offices and never want to be
called themselves.
Time Restricted lets you enable and disable Inbound Call
Processing at specific times for security purposes. Time Restric-
tions are configured in a different menu (see Step 11 below).
When the value changes from Enabled to Disabled, active con-
nections will not be affected.
9. Check the Outbound Call Processing .
This parameter defines whether or not outgoing calls are proc-
essed on this interface. It is useful for service providers, for
example, who offer online services and do not want to have
connection charges at their ISDN access. On the NetWare Multi-
Protocol Router for ISDN in AVM´s Data Call Center, Outbound
Call Processing is disabled, for example.
Default: Enabled
Options: Enabled, Disabled, Time Restricted
Enabled means that outgoing calls are allowed over this inter-
face.
When Outbound Call Processing is disabled, no outgoing calls,
including underlying call set-ups, are allowed over this interface.
It can only be used for incoming calls.
Time Restricted lets you enable and disable Outbound Call
Processing at specific times. Time Restrictions are configured in a
different menu (see Step 11 below). For example, you can disable
Outbound Call Processing during the weekends to make sure
that no one is able to dial into or out of your LAN and no
charges accrue over the weekend.
When the value changes from Enabled to Disabled, active con-
nections will not be affected.
10. Check the Thresholds for the ISDN Connection Monitor or
enter new values.
The ISDN Connection Monitor lets you configure three different
interface-related thresholds on a 24 h basis: the maximum
physical up-time per interface, the maximum outgoing calls per
interface and the maximum charge units per interface. When one