Operation Manual

LAN-based Access to ISDN: CAPI Connect Service (CCS)
Netware Connect for ISDN – 1 Introduction 9
The following illustrations show two sample applications of the ISDN access
through the CAPI Connect Service.
Example: Outgoing Connections from the LAN
* The AVM ISDN-Controllers T1 and T1-B do not support the fax protocol T.30. In this
case, the client must perform the conversion of analog fax signals.
Example: Incoming Connections to the LAN
Further information and examples of the general capabilities of CCS and
NDC can be found in the “NetWare Connect for ISDN 2.0 Installation and Ad-
ministration Guide” in the section “NDC on the LAN Clients and CCS on the
NetWare Connect for ISDN Server”, pp. 22–24.
NetWareConnect
for ISDN server
ISDN
CAPI
ISDN-Controller
NDC
NDC
NDC
FRITZ!data
AVM
FRITZ!fax
AVM
On-line service
access software
FRITZ!data
AVM
Telefax
CCS
RNSI
AVM ISDN-Controller B1, T1 or T1-B *
On-line service
Remote control
.
.
.
NetWareConnect
for ISDN server
CAPI
ISDN-Controller
CCS
RNSI
NDC
CAPI
pc ANYWHERE
Symantec
ISDN-Controller
...
pc ANYWHERE
Symantec
IDtrans
AVM
NDC
FRITZ!data
AVM
File transfer
ISDN
AVM ISDN-Controller B1, T1 or T1-B
nwci2.1.book Seite 9 Donnerstag, 13. Januar 2000 11:36 11