Operation Manual

Diagnostics
56 Netware Connect for ISDN – 6 Information for Administrators
The following list contains Year-2000 recommendations for all current Net-
Ware Connect for ISDN versions.
6.3 Diagnostics
Testing the ISDN Line
If problems arise in establishing connections through NetWare Connect for
ISDN, it is a good idea to test the ISDN-Controller and the ISDN line at the
lowest level, in DOS. Drivers and testing tools for this purpose are supplied
on the “NetWare Connect for ISDN 2.1” CD in the directory \UTILITY.
For further information, see “Testing ISDN Access” in the “NetWare Connect
for ISDN 2.0 Installation and Administration Guide”, p. 257.
Support: NWCIINFO.NLM
NWCIINFO.NLM is a special tool to document the installation and configura-
tion of the NetWare Connect for ISDN server.
For further information on NWCIINFO.NLM, see “NWCIINFO.NLM” in the
“NetWare Connect for ISDN 2.0 Installation and Administration Guide”, p.
259.
System and Error Messages
A list of the most important system and error messages can be found in
“System and Error Messages” in the “NetWare Connect for ISDN 2.0 Instal-
lation and Administration Guide”, pp. 275–283.
Year-2000 Recommendations for All NetWare Connect for ISDN Versions
Product Name Version Revision Recommendation
NWC for ISDN 1.0 all Upgrade to NWC for ISDN 2.0
Revision 2.0.45 or later.
NWC for ISDN 2.0 2.0.43
or older
Upgrade to Revision 2.0.45
or later.
NWC for ISDN 2.0 2.0.45
or later
This release is Year 2000 ready.
NWC for ISDN 2.1 2.1.01
or later
This release is Year 2000 ready.
NetWare/
Intranetware
all See Novell’s recommendations.
ISDN-Controller
B1, T1, T1-B1
all Year 2000 ready.
nwci2.1.book Seite 56 Donnerstag, 13. Januar 2000 11:36 11