Operation Manual

Monitoring the Remote Node Service for ISDN
50 Netware Connect for ISDN – 5 Operation
5.3 Monitoring the Remote Node Service for ISDN
The server module RNSISTAT is supplied to allow you to monitor the status of
RNSI. Start the module by entering the following command at the system
console:
load rnsistat
For a detailed descriptions of the RNSI status display, please see “Viewing
RNSI Status” in the “NetWare Connect for ISDN 2.0 Installation and Admin-
istration Guide”, pp. 249–250.
5.4 Monitoring the CAPI Connect Service
The server module CCSSTAT is supplied to allow you to monitor the status of
CCS. Start the module by entering the following command at the system con-
sole:
load ccsstat
In addition to informing you how long CCS has been active, the display also
contains all other information about the current status of the service:
l Statistics on CCS since the last start, including accumulated charges,
available ports, clients logged in and the number of outgoing calls.
l CCS’s current addresses.
l The names and current connections of the users currently logged in to
CCS.
For a detailed description of the CCS status display, please see “Viewing
CCS Status” in the “NetWare Connect for ISDN 2.0 Installation and Adminis-
tration Guide”, pp. 248–249.
nwci2.1.book Seite 50 Donnerstag, 13. Januar 2000 11:36 11