Operation Manual

Charge Control
40 Netware Connect for ISDN – 4 Configuration
Call Acceptance
Every client that dials in through an ISDN-Controller for which recall request
is “enabled” can reverse the charges so that the server is charged for the
connection. In this case it is a good idea to restrict RNSI access to authorized
clients:
load nwccon
Configure Services
RNSI
Parameters for ISDN-Controller NWCI
Expert Configuration: (view or modify)
Call Acceptance = Only Registered
Numbers: ...
All authorized clients must now be entered in the Call Acceptance Database
(also found in the RNSI configuration).
Force Dialback
Because the initial call is charged to the client, it is a good idea to keep this
call as short as possible. This is achieved by configuring a “Security Recall”.
This setting can be configured for all users or for selected users:
load nwccon
Configure Security
Set Global Parameters
Default Dialback Mode =
Force Dialback to a Caller-Specified Number
nwci2.1.book Seite 40 Donnerstag, 13. Januar 2000 11:36 11