Operation Manual

Number Configuration
Netware Connect for ISDN – 4 Configuration 37
ISDN-Controller Configuration (load nwcicon, “Configure ISDN-Control-
lers, select controller)
RNSI Configuration (load nwccon, ”Configure Services / RNSI / Parame-
ters for ISDN-Controller NWCI1“)
The number configured in RNSI must match the actual dial-in number of the
ISDN line in order for the call to be answered reliably.
RNSI can be tested using a client (such as NetWAYS/ISDN or PPP over ISDN
software) that is connected to another ISDN line and not connected to the
LAN.
Configuration of ISDN-Controller NWCI1
I/O Base Address: 150
Interrupt Request Level: 5
ISDN D Channel Protocol: DSS1
Connected to a PBX: Enabled
Outside Line Access: 0
...Number Length: 4
Configuration of RNSI Parameters for
ISDN-Controller NWCI1
Country Code: 49
Area Code: 030
ISDN Number: 39976
PBX Extension: 789
MSN:
Expert Configuration: (view or modify)
nwci2.1.book Seite 37 Donnerstag, 13. Januar 2000 11:36 11