Operation Manual

Installation
Netware Connect for ISDN – 2 Installation in NetWare 5 or NetWare With NIAS 4.1 15
5. In the next window, choose “Install on This Server” and confirm once
again by pressing “Enter”. The installation files are now copied.
Be patient: it may take a few seconds before the next dialog appears.
6. In the “NDS Login” dialog, enter your Administrator login name and
password to log in to the Directory Services. Select the option “Perform
Login and Continue” and confirm these entries by pressing “Enter”.
7. In the next dialog, use the “Enter” key to select the NDS context in
which you want to create the NetWare Connect for ISDN object. Then
begin creating the object by pressing the “Ins” key.
Do not close this dialog by pressing the “Esc” key. This would cancel
the creation of the NWCI object.
The NWCI object is required for configuration using the Snap-In for Net-
Ware Administrator. For further information on this Snap-In, please see
the section “NWCI Snap-In for NetWare Administrator (NWAdmin)” in
this manual.
8. NetWare Connect for ISDN’s configuration menu NWCICON is now load-
ed:
The CD key and the configuration parameters for the ISDN-Controller(s)
are entered under this menu.
9. Select the item “CD key” and enter the key found on the back of the
NetWare Connect for ISDN 2.1 CD case.
10. Select “Configure ISDN-Controllers”.
One ISDN-Controller is already shown in the list with default configura-
tion parameters.
NetWare Connect for ISDN Configuration Options
Configure ISDN-Controllers
Configure Global Parameters
CD-Key: [ - - - ]
Exit
List of ISDN-Controllers to load
NWCI1: AVM_B1, 150, 5, DSS1
nwci2.1.book Seite 15 Donnerstag, 13. Januar 2000 11:36 11