Operation Manual

89
3 Driver Software Installation – MS-DOS
English
1. Insert the CD-ROM labeled “AVM Mobile ISDN-
Controller M1/M2” in your CD-ROM drive.
See the file README.TXT in the subdirectory
\CARDWARE\M2\DOS\ENGLISH on the CD-ROM for the
latest information.
2. Start the installation program by entering
<CD-ROM DRIVE>:\CARDWARE\M2\DOS\
ENGLISH\Install <Return>
at the DOS prompt.
The installation routine’s sign-on screen appears.
You can abort the installation at any time by selecting
Exit or by pressing Ctrl+X. To proceed with the
installation, press RETURN.
3. A list of available drives appears. Choose the drive
on which you want to install the Controller software.
Use the arrow keys to browse in the list and confirm
your choice by pressing RETURN.
4. Next, choose the subdirectory where you want to
install the controller software.
The default is \IDRIVER, but this can be changed to
any name you wish. Confirm again by pressing
RETURN.
5. Next you must specify which D channel protocol you
want to use, DSS1 or 1TR6 (ISDN), or GSM. The
protocol you specify here is the one activated when
the Controller is loaded.
See Section 3.1.4 for instructions on switching D
channel protocols or between fixed ISDN and GSM
operation.
Now the installation routine copies all files to the specified
drive and directory. If there is not enough free space on
the drive, you will see an error message to this effect.
Otherwise, the installation of the AVM Mobile ISDN-
Controller M2 driver software is now complete. You