Operation Manual

English
115
4 ISDN and GSM Operation
• Open a different phone book with a specific database
structure (dBase file format)
To save the changes you have made in the phone book,
click on the Save mobile Phone book button in the tool
bar.
Close the phone book by clicking on the Close button in
the tool bar.
The Fonmanager is only supported by the Siemens S10(D,
active), E10(D) and Sony CMD X2000 mobile phones!
FRITZ!vox / FRITZ!fon
The mobile phone cannot transmit voice signals through
its data interface. For this reason, the modules FRITZ!vox
and FRITZ!fon cannot be used with the AVM Mobile
ISDN-Controller M2 in GSM operation.
AVM ISDN CAPI Port Driver
After you have installed FRITZ!GSM, three virtual modems
are available for use in the GSM network: AVM ISDN
Analog Modem, AVM ISDN Custom Config and AVM
ISDN Fax (G3).
AVM ISDN Analog Modem allows you to connect to
analog dial-in ports. AVM ISDN Custom Config can be
used to reach remote systems, such as Internet service
providers’ dial-in routers, that support the V.110 protocol.
V.110 permits a significantly quicker call set-up. Ask your
Internet service provider whether V.110 dial-in ports are
available.
To connect to an ISDN dial-in port using the V.110
protocol, you must select the modem “AVM ISDN Custom
Config”. This modem can be configured manually for
V.110 as follows:
1. Double-click on the Modems icon in the Control
Panel.
2. Select “AVM ISDN Custom Config” in the modem list.