Operation Manual

111
3 Driver Software Installation – Windows NT
English
you have finished configuring the options as desired,
confirm them by clicking on Continue.
On closing, the Setup program displays the Controller’s
configuration. Acknowledge this by clicking on Continue.
3.5.5 Installing CAPI Applications
After you have installed and started the ISDN-Controller,
you can install the CAPI applications you want to use with
the Controller. The ISDN communications suite FRITZ!32,
for example, with program modules for file transfer,
telefax and more, is included with your AVM Mobile
ISDN-Controller M2. If you want to use these capabilities
in GSM operation, install the CAPI application FRITZ!GSM.
AVM also supplies the ISDN CAPI Port Driver for
Windows NT 4.0 to connect your computer to the Internet
over ISDN using Windows NT’s TCP/IP stack. This driver
creates virtual modems that applications can use to
connect to Internet, on-line and BBS services, or for RAS
(Remote Access Service) connections to other computers
over ISDN. The AVM ISDN CAPI Port Driver is found on the
“Mobile ISDN-Controller M1/M2” CD-ROM in the folder
\Programs\Capiport\.
For further details, please see the on-line help file
accompanying the CAPI Port Driver and Chapter 4 in this
manual.
3.5.6 Uninstalling the Driver Software
To remove the Mobile ISDN-Controller from the Windows
NT system, open the Control Panel and double-click on
the Add/Remove Programs applet. Select the entry
“AVM Mobile ISDN-Controller M2” in the list of installed
software, and click on the Add/Remove button. The
“Uninstall” program is started. Follow the instructions
displayed.