Operation Manual

108
3 Driver Software Installation – Windows NT
Click on the Start Installation button to start the
installation program.
6. The Setup program’s sign-on window appears. If you
want to read the Readme file with the latest
information on the Controller and the installation
procedure, click on View AVM readme now.
To proceed with the installation, click on Continue.
You can abort the installation at any time by clicking
on the Cancel button.
7. In the next dialog, the option “Add a new Controller”
is selected by default if no Controller is currently
installed. Confirm it by clicking on Continue.
8. In the next dialog, enter the name of the directory in
which you want to install the Mobile ISDN-Controller
driver software. The default is C:\IDRIVER. You may
confirm this or enter any other directory name.
When your entry is complete, confirm by clicking on
the Continue button.
9. In the next dialog, select the desired I/O address
range and the interrupt for the Controller. The Setup
program suggests available resources. Confirm
these settings by clicking on Continue.
10. Next, select the GSM mobile telephone model you
want to use with the Controller, and click on Continue.
11. Now select the D channel protocol used on your
ISDN line.
If you intend to operate the AVM Mobile ISDN-
Controller M2 on your fixed ISDN line first, select
“DSS1” or “1TR6” (see Section 1.2).
If you want to use the Controller with your GSM
mobile phone, select the option “GSM”.
Click on Continue to confirm the settings.