Operation Manual

3 Installation of the Driver Software – Windows NT

3.5.2 Loading the Driver Software

In order for you to use the Controller, its driver software

must be loaded. The driver is loaded upon completion of

the installation procedure. The CAPI 2.0 interface is

available to applications only when the Controller is

loaded.

By default, the AVM Mobile ISDN-Controller M2 is

loaded automatically when you start Windows NT. Loading

takes place before programs in the Startup group are

started, so that you can use the Startup group to run CAPI

applications automatically. You can also deactivate the

automatic loading function (see Section 3.5.4 below).

The Controller must be inserted in your computer’s PCMCIA

slot in order for its driver software to be loaded correctly.

To load the Mobile ISDN-Controller manually, run the

program Mobile M1 Load in the AVM folder, under

“Programs” in the Windows NT Start menu.

Once the Controller has been successfully loaded, the

following window appears:

Fig. 6 Mobile ISDN-Controller sign-on windows in Windows