Operation Manual
118
3 Installation of the Driver Software – Windows NT
For more information please refer to the online help of the
AVM ISDN CAPI Port Driver as well as to Chapter 4 of this
manual.
3.4.6 Uninstalling the Driver Software
To remove the Mobile ISDN-Controller from the Windows
98 system, open the Control Panel and double-click the
Add/Remove Programs applet. Select the entry “AVM
Mobile ISDN-Controller M1” in the list of installed software,
and click the Add/Remove... button. The “Uninstall”
program is started. Follow the instructions displayed.
3.5 Windows NT 4.0 Installation
See the file README.HLP on the CD-ROM for further
information before you begin. Simply doubleclick the file to
view it.
3.5.1 Installing the Driver Software
To install the ISDN-Controller software for Windows NT,
proceed as follows:
1. Insert the AVM Mobile ISDN-Controller M1 in
your computer’s PCMCIA slot and restart Windows
NT.
2. Insert the “AVM Mobile ISDN-Controller M1/M2” CD-
ROM in your CD-ROM drive.
3. Start the CD introduction by doubleclicking the file
INTRO.HLP in the root directory of the CD-ROM.
4. Click Installation English and in the next window
AVM Mobile ISDN-Controller M1/M2.
5. In the next window choose the controller M1 by
clicking the symbol. Then select the operating system
Windows NT.
Click the Start Installation button to start the
installation program.