Operation Manual
115
3 Installation of the Driver Software – Windows 98
English
5. Select the option “Specify a location”. Click the
Browse button and browse to the path where the
Setup files are found:
<CD-ROM DRIVE>\CARDWARE\M1\WINDOWS.98
\ENGLISH.
Confirm the path by clicking OK and then Next.
6. The path then appears in the next dialog. If it is
correct, click Next.
7. The driver installation files are copied to a temporary
folder. While the files are being copied, a short audio
signal tells you that the new hardware component
has been added successfully.
A message confirms that Windows has installed the
software required by the new hardware device. Click
Finish.
8. The Setup program’s sign-on window appears. If you
want to read the Readme file with the latest
information on the Controller and the installation
procedure, click View AVM readme now.
To proceed with the installation, click Continue.
You can abort installation at any time by clicking the
Cancel button.
9. In the next dialog select the controller you want to
install. The Mobile ISDN-Controller M1 is selected
by default. Click Continue.
10. Then enter the name of the folder in which you want
to install the ISDN-Controller software. The default is
C:\IDRIVER. You may retain this or enter any other
name.
When your entry is complete, confirm by clicking the
Continue button.
11. Next, select the GSM mobile telephone model you
want to use with the Controller, and click Continue.
12. The installation program now copies all files to the
specified folder.