Operation Manual

113
3 Installation of the Driver Software – Windows 95
English
sage appears to inform you when the card can be
removed.
If you reinsert the Controller, it is loaded automatically
with whichever D-channel protocol was active last, and is
then ready for use.
3.3.4 Enable/Disable Automatic Loading
To enable or disable the automatic loading of the
Controller’s driver software, run the M1 Setup program
in the “AVM” program group. This program allows you to
enable and disable the automatic loading of the Control-
ler. Furthermore, you can set the CAPI SoftCompression
option or change the GSM mobile phone model used with
the M1. Confirm the options by clicking on Continue.
When it closes, the Setup program displays the Controller’s
configuration. Acknowledge this by clicking Continue.
3.3.5 Installing CAPI Applications
Once you have installed and started the ISDN-Controller,
you can install the CAPI applications to be used with the
Controller. The communications suite FRITZ!GSM, for
example, with program modules for file transfer, telefax
and more, is included with your AVM Mobile ISDN-
Controller M1.
AVM also supplies the ISDN CAPI Port Driver for
Windows 95/98 to connect your computer to the Internet
over ISDN using Windows 95/98’s TCP/IP stack. This
driver creates virtual modems which applications can use
to connect to Internet, online and BBS services, or for
RAS (Remote Access Service) connections to other
computers over ISDN. The AVM ISDN CAPI Port Driver is
stored on the Mobile ISDN-Controller M1/M2 CD-
ROM in the folder \PROGRAMS\CAPIPORT\.
For more information please refer to the online help of the
AVM ISDN CAPI Port Driver as well as to Chapter 4 of this
manual.