Operation Manual
LS
3 Installation of the Driver Software – Windows 95
can also deactivate the automatic loading function (see
Section 3.3.4 below).
To load the Mobile ISDN-Controller manually, run the
program Mobile M1 Load in the "AVM" folder under
“Programs” in the Windows 95 Start menu.
After the Controller has been loaded successfully, the
following message box appears:
Fig. 5 Mobile ISDN-Controller sign-on message in Windows
95
When you restart the computer, the Controller is loaded
with whichever D-channel protocol was active last.
3.3.3 Unloading the Driver Software
To remove the driver software from memory, click
Mobile M1 Unload in the "AVM" folder under "Programs"
in the "Start" menu. A message appears confirming the
command.
Before you remove the AVM Mobile ISDN-Controller
M1 from the PCMCIA slot, you must first deactivate it.
Click the PC card icon in the “tray” (at the right of the
Windows 95 task bar). In the pop-up menu that appears,
select “Stop AVM Mobile ISDN-Controller M1”. A mes-
Deactivating the Controller
Loading the Controller