Operation Manual
LS
3 Installation of the Driver Software – Windows 95
3.2.4 Installing CAPI Applications
After you have installed and started the ISDN-Controller,
you can install the CAPI applications to be used with the
Controller. The ISDN communications suite FRITZ!
,
for
example, with program modules for file transfer, telefax
and more, is included with your AVM Mobile ISDN-
Controller M1.
3.2.5 Uninstalling the Driver Software
To undo the installation of the AVM Mobile ISDN-
Controller M1 for Windows 3.x, start the installation
program setup.exe from the installation disk.
Setup reports that an installed ISDN-Controller was
detected. Select the option “Deinstallation” and follow
the program’s instructions. If you have copied the pro-
gram icon M1 Load to the Startup group, you should
delete it. You must also remove the MENABLE.EXE
command from your AUTOEXEC.BAT file.
3.3 Windows 95 Installation
Specially developed Windows 95 driver software is
supplied with the AVM Mobile ISDN-Controller M1.
This true 32-bit virtual device driver (VxD) provides full
support for all features of Microsoft Windows 95.
The Common ISDN API 2.0 driver supplied supports both
Windows and DOS applications simultaneously. This CAPI
version can also be used with existing data applications
designed for CAPI 1.1.
See the file README.HLP on the CD-ROM for further
information before beginning. Simply double-click the file
to view it.
3.3.1 Installing the Driver Software
To install the ISDN-Controller software for Windows 95,
proceed as follows: