Operation Manual

CAPI 2.0 and Euro-ISDN Messages
NT/MPRI – 7 Messages 98
0x34D2 Identified channel does not exist[#34D2]
The equipment returning this message has received a request
to use a channel not activated to accept calls on the interface.
This message is generated if, for example a primary interface
user has subscribed to channels 1 through 12 and the user’s
equipment or the network attempts to use channels 13 through
23.
0x34D3 A suspended call exists, but this call identity does not[#34D3]
This message indicates an attempt to resume a call with a call
identity which does not match that of any currently suspended
calls.
0x34D4 Call identity in use[#34D4]
The network received a request to resume a call. The suspend
call request contains a call identity which is already in use for
another suspended call.
0x34D5 No call suspended[#34D5]
The network received a request to resume a call. The request
contains call identity elements which do not indicate any cur-
rently suspended call.
0x34D6 Call with the requested call identity has been cleared[#34D6]
The network has received a request to resume a call. The re-
quest contains call identity elements which once indicated a
suspended call; however, that call was cleared down while
suspended (either by network time-out or by one of the parties
to the call).
0x34D8 Incompatible destination[#34D8]
The equipment returning this message received a request to
establish a connection. However, the call has low-layer, high-
layer compatibility or some other attributes which cannot be
accommodated.
0x34DB Invalid transit network selection[#34DB]
This message indicates that a transit network was identified in
an incorrect format.
0x34DF Invalid message, unspecified[#34DF]
This message is returned for an invalid message only when no
other error message in the “invalid message” class applies.
Number Messages/Explanations
ntmpri-e.book Seite 98 Donnerstag, 28. Februar 2002 11:26 11