Operation Manual

CAPI 2.0 and Euro-ISDN Messages
97 NT/MPRI – 7 Messages
0x34B2 Requested facility not subscribed[#34B2]
This message indicates that the requested supplementary ser-
vice could not be provided by the network because the user
has not made the necessary administrative arrangements.
0x34B9 Bearer capability not authorized[#34B9]
The user requested a bearer capability which is implemented
by the equipment that generated this message, but which the
user is not authorized to use.
0x34BA Bearer capability not currently availabe[#34BA]
The user requested a bearer capability which is implemented
by the equipment that generated this message, but which is
not available at this time.
0x34BF Service or option not available, unspecified[#34BF]
This message is used to report a “service or option not avail-
able” event only when no other message in this class applies.
0x34C1 Bearer capability not implemented[#34C1]
The equipment sending this message does not support the
bearer capability requested.
0x34C2 Channel type not implemented[#34C2]
The equipment sending this message does not support the
channel type requested.
0x34C5 Requested facility not implemented[#34C5]
The equipment sending this message does not support the re-
quested supplementary service,
0x34C6 Only restricted digital information bearer capability is avail-
able[#34C6]
A device has requested an unrestricted bearer service, but the
equipment sending this message supports only the restricted
version of the requested bearer capability.
0x34CF Service or option not implemented, unspecified[#34CF]
This message is used to report a “service or option not imple-
mented” event only when no other message in this class ap-
plies.
0x34D1 Invalid call reference value[#34D1]
The equipment returning this message has received a message
with a call reference which is not currently in use on the us-
er/network interface.
Number Messages/Explanations
ntmpri-e.book Seite 97 Donnerstag, 28. Februar 2002 11:26 11