Operation Manual

CAPI 2.0 and Euro-ISDN Messages
NT/MPRI – 7 Messages 96
0x349D Facility rejected[#349D]
This message is returned when a requested service cannot be
provided by the network.
0x349E Response to status inquiry[#349E]
This message is included in the status report when the status
report was generated in response to a status inquiry.
0x34A2 No circuit/channel available[#34A2]
This message indicates that no suitable circuit or channel is
currently available to send or receive data.
0x34A6 Network out of order[#34A6]
This message indicates that the network is not working correct-
ly and that the condition is likely to last relatively long; imme-
diate redialing is not likely to be successful.
0x34A9 Temporary failure[#34A9]
This message indicates that the network is not functioning cor-
rectly, but that the condition is not likely to last long; the user
may try dialing again immediately.
0x34AA Switching equipment congestion[#34AA]
The switching equipment generating this message is currently
experiencing heavy traffic.
0x34AB Access information discarded[#34AB]
The network was unable to supply the access information re-
quested by the user, such as user information and low-layer
compatibility.
0x34AC Requested circuit/channel not available[#34AC]
The circuit or channel indicated by the requesting unit cannot
be provided by the other side of the interface.
0x34AF Resource unavailable, unspecified[#34AF]
This message is used to report a resource-unavailable event
only if no other message in this class applies.
0x34B1 Quality of service unavailable[#34B1]
The requested quality of service as defined in CCITT recom-
mendation X.213 cannot be provided (throughput or transit de-
lay is not supported).
Number Messages/Explanations
ntmpri-e.book Seite 96 Donnerstag, 28. Februar 2002 11:26 11