Operation Manual

CAPI 2.0 and Euro-ISDN Messages
NT/MPRI – 7 Messages 94
0x3318 Disconnected during transfer (local abort)[#3318]
Due to internal problems the remote station called is not ready
to receive.
0x3319 Illegal parameter coding (e.g. SFF coding error)[#3319]
This message indicates internal application errors.
0x3400 No ISDN connection. Reason unknown[#3400]
The connection was terminated for unknown reasons.
0x3490 Normal call clear-down[#3490]
This message indicates that one of the parties involved in the
call initiated a call clear-down.
0x349A Non-selected user clearing[#349A]
This message indicates that the incoming call was not directed
to the user.
0x349F No ISDN connection. Reason unknown[#349F]
The connection was terminated for unknown reasons.
0x3481 Unallocated (unspecified) number[#3481]
This message indicates that the destination requested by the
caller could not be reached. The number dialed has not been
assigned to terminal equipment.
0x3482 No route to specified transit network[#3482]
The equipment sending this message has received a request
to route the call through a particular transit network that it
does not recognize, either because the transit network does
not exist or because this particular transit network does not
support the equipment sending the message. Support for this
message is network-dependent.
0x3483 No route to destination[#3483]
The user called cannot be reached because the network
through which the call has been routed does not serve the des-
tination desired. Support for this message is network-depen-
dent.
0x3486 Channel unacceptable[#3486]
This message indicates that the sending unit does not accept
the channel identified for use in this call.
Number Messages/Explanations
ntmpri-e.book Seite 94 Donnerstag, 28. Februar 2002 11:26 11