Operation Manual

CAPI 2.0 and Euro-ISDN Messages
93 NT/MPRI – 7 Messages
0x3302 Protocol error, layer 2[#3302]
No connection could be established between the terminal
equipment and the network terminator or local switch. The call
set-up failed at layer 2 of the ISDN protocol: no messages
could be exchanged between the terminal equipment and the
local switch. Possible causes include: the line is not enabled at
the network terminator; an incompatible D-channel protocol
used on the line.
0x3303 Protocol error, layer 3[#3303]
No connection could be established between the terminal
equipment and the network terminator or local switch.
0x3304 Another application got the call[#3304]
This message indicates that another active application re-
ceived the incoming call.
0x3311 Connecting not successful (remote station is not a fax G3 ma-
chine)[#3311]
The remote station called is not a fax machine.
0x3312 Connecting not successful (setting error)[#3312]
Due to internal problems (setting errors) the remote station
called is not ready to receive.
0x3313 Disconnected before transfer (remote station does not sup-
port transfer mode, e.g. wrong resolution)[#3313]
Due to internal problems the remote station called is not ready
to receive.
0x3314 Disconnected during transfer (remote abort)[#3314]
Due to internal problems the remote station called is not ready
to receive.
0x3315 Disconnected during transfer (remote procedure error, e.g. un-
successful repetition of T.30 commands[#3315]
Due to internal problems the remote station called is not ready
to receive.
0x3316 Disconnected during transfer (local tx data underrun)[#3316]
This message indicates internal application errors.
0x3317 Disconnected during transfer (local rx data overflow)[#3317]
Due to internal problems the remote station called is not ready
to receive.
Number Messages/Explanations
ntmpri-e.book Seite 93 Donnerstag, 28. Februar 2002 11:26 11