Operation Manual

CAPI 2.0 and Euro-ISDN Messages
91 NT/MPRI – 7 Messages
0x2002 Illegal controller / PLCI / NCCI[#2002]
This message indicates internal applications errors.
0x2003 Out of PLCI[#2003]
This message indicates that the controller is not adequately
configured. Please check the controller configuration.
0x2004 Out of NCCI[#2004]
This message indicates that the controller is not adequately
configured. Please check the controller configuration.
0x2005 Out of LISTEN[#2005]
This message indicates that the controller is not adequately
configured. Please check the controller configuration.
0x2006 Out of fax resources (T.30 protocol)[#2006]
This message indicates that the controller is not adequately
configured. Please check the controller configuration. Change
the settings so that more resources are available.
0x2007 Illegal message parameter coding[#2007]
This message indicates internal application errors.
0x3001 B1 protocol not supported[#3001]
This message indicates that the driver does not provide the
protocols the application requires. Install the necessary proto-
cols.
0x3002 B2 protocol not supported[#3002]
This message indicates that the driver does not provide the
protocols the application requires. Install the necessary proto-
cols.
0x3003 B3 protocol not supported[#3003]
This message indicates that the driver does not provide the
protocols the application requires. Install the necessary proto-
cols.
0x3004 B1 protocol parameter not supported[#3004]
This message indicates that the driver does not provide the
protocol options required by the application.
0x3005 B2 protocol parameter not supported[#3005]
This message indicates that the driver does not provide the
protocol options required by the application.
Number Messages/Explanations
ntmpri-e.book Seite 91 Donnerstag, 28. Februar 2002 11:26 11