Operation Manual

Messages

NT/MPRI – 7 Messages 88

7 Messages

This chapter lists and explains the error messages which arrive from

the ISDN network and the messages displayed by the NT/MPRI.

All messages are recorded in the ISDN event log in the following for-

mat:

Example:

7.1 CAPI 2.0 and Euro-ISDN Messages

The following messages are sorted in numerical order.

12.5.2000 14:14:42, ADC-IP

ISDN-Controller 1: B-channel connection to

“03039984350” is set up.

Number Messages/Explanations

0x0001 NCPI not supported by current protocol, NCPI ignored[#0001]

This message indicates protocol conflicts between the sending

and receiving stations.

0x0002 Flags (signals) not supported by current protocol, flags ig-

nored[#0002]

This message indicates that certain control information accom-

panying the data sent was not supported by the receiving sta-

tion’s protocol.

0x0003 Signal already sent by another application[#0003]

This message indicates that another active application has al-

ready reacted to the incoming call.

0x1104 Queue is empty[#1104]

This message indicates internal application errors.

0x1001 Too many CAPI applications[#1001]

This message indicates that there are too many CAPI applica-

tions active. Close any applications currently not required.

ntmpri-e.book Seite 88 Donnerstag, 28. Februar 2002 11:26 11